Earlier this year, the Air Force Research Laboratory (AFRL) launched its QUalificaiton of Additive Structures for Aerospace Requirements (QUASAR) Program. The intent of this program is twofold: to identify state of the art and current gaps in the qualification and certification (Q&C) activities for additively manufactured (AM) fracture-critical metallic [...]
In additive manufacturing (AM), there are many potential benefits for cost savings, among them being • integration of many conventional components into a single AM build; • complex shapes and orientations; • product volume control (short runs for sustainment vs. longer runs for new production); and • limited post-build [...]
BPMI will utilize VEXTEC's commercial software to integrate materials science and structural modeling for more efficient design and analysis in support of the U.S. Navy FOR IMMEDIATE RELEASE: Brentwood, TN (September 4, 2024) – VEXTEC Corporation was selected by Bechtel Plant Machinery, Inc. (BPMI) to provide its VPS-MICRO Software [...]
FOR IMMEDIATE RELEASE: Brentwood, TN, October 10, 2022 – The United States Air Force Rapid Sustainment Office (USAF RSO) has signed-on for a yearlong Phase III program with VEXTEC Corporation. The Phase III program will deploy VEXTEC’s VPS-MICRO computational predictive software to USAF engineering teams at the forefront of [...]
FOR IMMEDIATE RELEASE: Brentwood, TN, October 10, 2022 – VEXTEC Corporation was awarded a sole source contract from the U.S. Navy to expand its Corrosion Cracking Maintenance Prediction Software (CCMPS). CCMPS is used by the Navy to predict the future maintenance needs for aluminum (5000 series) ship structures. The [...]
To celebrate our 2nd anniversary with America Makes, VEXTEC is offering discounted pricing on VPS-MICRO to America Makes members. VEXTEC provides software and services to predict and improve product durability. Our VPS-MICRO software helps clients virtually qualify their metal components for fatigue durability. It is an Integrated Computational Materials [...]
Collaborative work between VEXTEC and Lockheed Martin Aeronautics on Additive Manufacturing (AM) has recently been presented at two high-profile aerospace conferences. The work focused on Laser Powder Bed Fusion (LPBF) additive techniques for AlSi10Mg and Ti-6Al-4V alloys. VEXTEC's computational VPS-MICRO® product reliability software predicted the fatigue performance of LPBF [...]
Simulation Software to Solve Certification Challenges in Additive Manufacturing In an article published for Aviation Week's MRO-Network.com, author Lindsay Bjerregaard, discusses VEXTEC's VPS-MICRO® simulation software and how it promises to reduce product development time and cost through optimization of design and manufacturing processes. Click here to read the full article.
The largest time chunks in any product’s life cycle are in the design and engineering phases. This is because there are questions that need to be answered, both in how the product will perform and how the product itself will be made. Each of these [...]
In Part I of this blog series, we give a brief history of Additive Manufacturing (AM), as well as some of the obstacles that are still holding AM back. Everyone is excited about the potential of this technology, but it’s quite a different thing to have sufficient confidence in [...]